VigorTalk ATA24

Caractéristiques

1. VoIP ( Voice over IP )
    •    FXS ( 24 Ports )
    •    MGCP / SIP / H248
    •    Codec G.711, 729A, 723.1, G.726
    •    VAD ( Silence Suppression ) & CNG
    •    G.168-2000 Echo Canceller, Jitter Buffer
    •    Packet Loss Concealment
    •    RFC2833 - Out of Band DTMF
    •    Gain / Attenuation Setting
    •    Modem Support Rate Up V.92
    •    Caller ID Support : Bellcore, ETSI, DTMF-based ( Nor-Europe )
    •    Line Polarity Reversal Generation
    •    Hunting Group
    •    Call Holding & Call Forwarding
    •    Call Transfer, Call Waiting , 3-way Conference
    •    Outbound Proxy
    •    NAT Traversal ( STUN ) ( RFC 3489 )
    •    Incoming Call Barring
    •    T.38 Fax Relay
    •    Single Codec Assignment
    •    Hot Line to Internet / PBX / PSTN
    •    Multiple SIP Proxies Registering
2. Network Features
    •    DHCP Client
    •    DDNS Client
    •    Port Mirroring
    •    PPPoE / PPTP *
    •    WAN Port Redundancy *
3. Firewall
    •    Denial of service Prevention
4. VigorCMS
    •    On-line Device Status
    •    Firewall Configuration ( DoS )
    •    VoIP Configuration
    •    Performance Monitoring
    •    Topology
    •    Log
    •    Alarm
5. Line Test and Diagnostic Functions
    •    Metallic Loop Test
    ◦    AC Voltage
    ◦    AC Current
    ◦    DC Voltage
    ◦    DC Current
    ◦    Resistance
    ◦    Capacitance
    •    Line Card Test
    ◦    Normal Battery
    ◦    Loop Current
    ◦    Dial Tone Testing
    ◦    Dial Digit Testing
    ◦    Ring Voltage Testing
    •    User Phone Test
    ◦    Pulse Digit Receiving Test
    ◦    Low Frequency Signal Level Test
    ◦    High Frequency Signal Level Test
    ◦    Low Frequency Test
    ◦    High Frequency Test
    ◦    DTMF Tone Dialing Digit Receiving Test
    ◦    Howler Tone Test
    ◦    Ringing Test
6. System Management
    •    Web User Interface
    •    Command Line Interface ( Telent, Console )
    •    Command Line Interface-SSH
    •    Remote Firmware Upgrade
    •    Syslog for Logging and Monitoring
    •    SNMP - Basic MIBs
    •    SNMP - VoIP
    •    SNMP - Firewall ( DoS )
    •    SNMP - Alarm


* Future release

Spécifications

Schémas d'applications

VigorTalk ATA-24 is a VoIP Gateway and it provides large VoIP ports which is designed for ISP/SI. VigorTalk ATA-24 not only provides high quality call service, but also supports various VoIP protocol and supplementary services.

The SNMP-based of VigorCMS is the management software offers an easy way to remotely set up configurations, update system status, display alarm events, monitor system behaviors, perform diagnostics and download firmware and email attacking alert. For installation, status monitor and management of VigorTalk ATA-24 series of routers, it will be easily accomplished through a built-in web user interface or Telnet command line Interface.

Figure 1. Front Panel

Figure 2. Branch Office Interconnection Application

Figure 3. Security Application

Interface Web

Testez l'interface Web du produit en ligne

Fiche technique

Télécharger la fiche technique au format pdf